Download Print this page

Change Of Drive Names Displayed On The "Select Drive" Screen - Fostex PD-6 Supplemental Operation Manual

Supplement for v2.20
Hide thumbs Also See for PD-6:

Advertisement

Model PD-6 operation manual (Supplement for V2.20)

Change of drive names displayed on the "Select drive" screen

Drive names displayed on the "Select drive" screen which is used when you select the drive
are partly changed.
To bring up the "Select drive" screen, carry out either of the following operations.
1.
When the shift mode is active (the [SHIFT] indicator is lit), press the [LIGHT] key.
2.
When the shift mode is inactive, press the [SETUP] key to enter the Setup menu and select the
"Select drive" menu item, then press the [ENTER] key.
The "drive select" function has been added from V2.00. See the "Version 2.00 supplemen-
tary manual" for details about this function.
Before V2.20
The "Select drive" screen when no drive option is installed
A "Select drive" screen example when the Model 9056 (Internal hard disk) is installed and the PD-6 DVD-RAM is selected
A "Select drive" screen example when the EX-12 is connected and the EX-12 DVD-RAM is selected
When the Model 9056 optional hard disk drive in installed and the EX-12 is connected to
the PD-6, you can select from among the PD-6 DVD-RAM drive (iDVD), internal hard disk
partitions (iP01 through iP27), the EX-12 DVD-RAM drive (eDVD) and EX-12 hard disk
partitions (eP01 through eP08).
From V2.20
The "Select drive" screen when no drive option is in-
stalled.
You can select from among the PD-6 DVD-RAM drive
(iDVD) and HDD partitions (iP01 through iP27).
You can select from among the PD-6 DVD-RAM drive
(iDVD), EX-12 DVD-RAM drive (eDVD) and EX-12
hard disk partitions (iP01 through iP08).
4
Model PD-6 operation manual (Supplement for V2.20)
Change in the "Pull Up/Down" function
With the earlier version, the TC frame rate always changes in sync with +/- 0.1% speed
change. With the new version, the TC frame rate does not always change, as shown in the
table below.
[FRAME] SW
0%
+0.1%
setting
23.976
23.97 FPS
24 FPS
23.97 FPS
24
24 FPS
23.97 FPS
24 FPS
25
25 FPS
25.025FPS
24.97 FPS
29.97 FPS
29.97DF / ND
29.97 FPS
30 FPS
30 FPS
30DF / ND
30 FPS
213
-0.1%
The TC frame changes only when the clock is
pulled up.
The TC frame changes only when the clock is
pulled down.
The TC frame changes when the clock is pulled
up or down.
The TC frame changes only when the clock is
pulled up.
The TC frame changes only when the clock is
29.976
pulled down.

Advertisement

loading