Power Supply For External Devices - Fostex PD-6 Operation Manual

Function key
F1 key
F2 key
F3 key
F4 key
Shortcuts
ALT + F keys
ALT + C keys
ALT + S keys
ALT + U keys
ALT + T keys
ALT + E keys
CTRL + L keys
Enters the TC Setup mode.
UP/DOWN
LEFT/RIGHT
key
ESC key
ENTER key

Power supply for external devices

The PD-6 provides a pair of the [DC OUT] connectors, from which "DC 12 V" power can
be supplied to external devices.
<Notes>
• The [DC OUT] connectors can deliver, in total, up to 0.5 ampere electric current at DC 12V.
Make sure that the total ampere rating of the devices connected to the [DC OUT] connectors
does not exceed 0.5 ampere.
• We strongly recommend to use the [DC OUT] connectors while the PD-6 is running with the
AC adaptor (or an external battery). If you use the [DC OUT] connectors to supply the
power to one or two external devices while the PD-6 is running with the internal battery,
the battery power is exhausted quickly.
PD-6 DVD Location Recorder (Chapter 4: Basic connections)
Brings up the "Edit file name" menu in the Utility mode.
Acts the same as the [CIRCLE TAKE] key on the panel.
Brings up the "Default file name" menu in the Setup mode.
Brings up the "Default track name" menu in the Setup mode.
Acts the same as the [FILE SEL] key on the panel.
Acts the same as the [CUE] key on the panel.
Enters the Setup mode.
Enters the Utility mode.
Enters the TC Setup mode.
Enters the EDL SEL mode.
Acts the same as the [LOCATE] key on the panel.
These keys can be used to enter characters or move the cursor position when
editing the name for a label or file name or in the Setup mode.
Acts the same as the [EXIT] key on the panel.
Acts the same as the [ENTER] key on the panel.
External device
1
2
3
4
External device
3 1
2
4
GND
NC
NC
DC12V
55