Locating To The Desired Time; Locating To The Desired Cue Point - Fostex PD-6 Operation Manual

Locating to the desired time

You can locate the recorder to the desired position by specifying the time
value.
1. While the recorder is stopped, press any one of numeric keys.
The PD-6 enters the time edit mode, while the TIME EDIT screen appears on the
LCD display.
<Note>
The time value can be specified according to the time display mode selected
before entering the time edit mode. In the screen example above, you can
specify the time value based on LTC.
2. Enter the desired time value using the [SEL] dial (or numeric keys).
You can move the field to be edited using the [
Pressing the [CLEAR] key clears the time value to zero.
3. After entering desired value to all fields, press the [LOCATE] key.
The recorder quickly locates to the position at the specified time.

Locating to the desired cue point

You can locate the recorder quickly to a desired cue point by selecting the
cue point from the cue list.
1. While the recorder is stopped (or playing back), press the [CUE] key.
The CUE LIST screen appears.
2. Select (highlight) the desired cue point from the cue list using the [SEL] dial
(or the [
The recorder quickly locates to the cue point.
<Note>
Regardless of the "Skip mode" menu setting, you can always locate to the
desired cue point by using this function.
PD-6 DVD Location Recorder (Chapter 5: Recording/playback)
SKIP/CURSOR
SKIP/CURSOR
] keys), and press the [LOCATE] key.
] keys.
79