Other Screens - Fostex PD-6 Operation Manual

PD-6 DVD Location Recorder (Chapter 3: Names and functions)

Other screens

44
• When you set an unused disk
If you set an unused disk after turning on the PD-6, the display prompts you to
format the disk, as below. See page 24 for details about disk formatting.
• When you set a disk with recorded data
If you set a disk with recorded data after turning on the PD-6, the file name and No.
are shown in the appropriate fields.
• Time display mode selection
Each press of the [TIME/DISP MODE] key (when unSHIFTed) switches the time display
mode in the following order.
GEN
Shows LTC recorded on the disk. You can set the start time of LTC recording using the
LTC
appropriate menu in the TC Setup mode.
LTC IN
Shows incoming external LTC. If no LTC is received, "————" is shown.
Shows the absolute time, which is set to "00H00M00S00SF" at the beginning of the file.
ABS
Shows time code generated by the internal TC generator.
GEN
The value depends on [TC GEN] switch setting.
• Display mode selection
While SHIFTed, each press of the [TIME/DISP MODE] key switches the display between
the "Normal screen" and "Level screen".
<Normal screen>
LTC
LTC IN
ABS
<Level screen>