Slate Tone Recording Time And Mode Setting (Tone Rec Mode) - Fostex PD-6 Operation Manual

PD-6 DVD Location Recorder (Chapter 7: Setup mode)

Slate tone recording time and mode setting (Tone rec mode)

94
The "Tone rec mode" menu sets the recording time and mode of the slate
tone which is recorded at the beginning of a file when recording is taken
place in the New file mode.
On the "Tone rec mode" menu screen, you can set the recording time (Tone
rec time) between 0 and 30 seconds, as well as the recording mode (Tone
rec) from among "TONE", "4POT TONE" and "Off".
<Slate tone recording time> (Tone rec time)
Option
You can set the slate tone recording time in 1 second steps (the default
0 to 30 seconds
setting is 10 seconds).
<Slate tone recording mode>
Option
Nothing is recorded.
Off (default)
The 1 kHz tone at the reference level is recorded for the duration of "Tone
TONE
rec time". While the slate tone is being recorded, you cannot record any
external signal.
Repeats four times the combination of recording the 1 kHz tone at the
4POP TONE
reference level for 0.5 second and muting for 0.5 second.
While the slate tone is being recorded, you cannot record any external signal.
Comment
Comment
flashing