Editing A Description Information; Adding A Description Information; Deleting A Description Information - Fostex PD-6 Operation Manual

Editing a description information

1. Select a description information item and press the [ENTER] key.
The leftmost character of the selected item flashes. You can now make editing.
2. Use the [SKIP/CURSOR
on the right of "=".
3. Use the [SEL] dial (or numeric keys) to enter the desired character.
Use the [
When using the numeric keys for entering characters, pressing any other
numeric key moves the cursor to the right automatically.
To clear the currently recorded information, press the [CLEAR] key.
Pressing the [CLEAR] key clears the right next character to the cursor position.
4. After editing the information, press the [ENTER] key to confirm the setting.
5. To edit other items, carry out the same procedure as above repeatedly.

Adding a description information

1. Select the "<New line>" item at the bottom and press the [ENTER] key.
You are ready to enter information.
Carry out the same procedure as above for entering new information.
<Note>
When adding information to "New line", enter the "meta data header ID"
followed by data.

Deleting a description information

1. Select a line you want to delete, and press the [ENTER] key.
You can now edit the information, as described above.
2. Use the [CLEAR] key to clear the whole information, and press the [ENTER]
key.
The line is deleted, while the following lines move up.
PD-6 DVD Location Recorder (Chapter 8: Utility mode)
] key to move the cursor to any desired character
SKIP/CURSOR ] key to move the cursor.
flashing
111