Selecting An Input Source; Adjusting The Input Gain - Fostex PD-6 Operation Manual

You can make recording on both sides A and B of an 8-centimeter DVD-RAM
disk. The following table shows the approximate recording time (in minute)
for each side according the [FS/24] and [REC TR] switch settings.
44.1kHz/16bit-2TR
48kHz/16bit-2TR
44.1kHz/16bit-4TR
48kHz/16bit-4TR
44.1kHz/16bit-5TR
48kHz/16bit-5TR
44.1kHz/16bit-6TR
48kHz/16bit-6TR

Selecting an input source

Set the [INPUT MODE] switch appropriately according to the source
(microphone or line) connected to the [ANALOG MIC/LINE IN] connector.
Line input
"L" position
For a line level analog
audio signal
On channels 2, 4 and 6, the [PHASE] switches are provided, allowing reversing
the phase.
PD-6 DVD Location Recorder (Chapter 5: Recording/playback)
118
44.1kHz/24bit-2TR
108
48kHz/24bit-2TR
59 44.1kHz/24bit-4TR
54
48kHz/24bit-4TR
47 44.1kHz/24bit-5TR
48kHz/24bit-5TR
43
39
44.1kHz/24bit-6TR
48kHz/24bit-6TR
36
"D" position
F o r a d y n a m i c
microphone
78 88.2kHz/24bit-2TR
72 96kHz/24bit-2TR
39
36
31
28
26
24
Mic input
"P" position
F o r a c o n d e n s e r
m i c r o p h o n e w h i c h
requires the DC 48 V
phantom power.
[INPUT SEL] select switches
[PHASE] switches
[INPUT GAIN] controls
39
36
"T" position
F o r a c o n d e n s e r
microphone swhich
requires the DC 12 V
phantom power.
59