Skip/Locate Functions; Skipping By File; Skipping By Cue Point; Locating To The Beginning (Abs 0) Of A File - Fostex PD-6 Operation Manual

PD-6 DVD Location Recorder (Chapter 5: Recording/playback)
The PD-6 offers comprehensive skip/locate functions.

Skipping by file

Skipping by cue point

Locating to the beginning (ABS 0) of a file

Locating to the end (REC END) of a file

Locating to the previous locate point

78

Skip/locate functions

When more than one audio file is created on the current disk, you can quickly
skip to the beginning (ABS 0) of a desired track.
By pressing the or
you can skip forward or backward a file. Therefore, pressing the
key as many times as required skips to the beginning of the desired file.
<Note>
To skip by file when pressing the
Setup mode must be set to "File". The default setting is "File". If it is set to "CUE",
change the setting.
You can quickly skip to a desired cue point on the current audio file.
By pressing the or
you can skip to the next or previous cue point. Therefore, pressing the
key as many times as required skips to the desired cue point.
<Note>
To skip by cue when pressing the
Setup mode must be set to "CUE". The default setting is "File", so change the
setting to "CUE".
While the recorder is stopped, pressing the [REW] key while holding down
the [STOP] key locates to the beginning (ABS 0) of the current file quickly.
While the recorder is stopped, pressing the [F FWD] key while holding down
the [STOP] key locates to the record end position (REC END) of the current
file quickly.
While the recorder is stopped, pressing the [LOCATE] key locates to the
position where you located last time.
([SKIP/CURSOR]) keys while the recorder is stopped,
or key, the "Skip mode" menu in the
([SKIP/CURSOR]) keys while the recorder is stopped,
or key, the "Skip mode" menu in the
or
or