Limiter Parameter Setting (Limiter Parameter) - Fostex PD-6 Operation Manual

PD-6 DVD Location Recorder (Chapter 7: Setup mode)

Limiter parameter setting (Limiter parameter)

98
The "Limiter parameter" menu makes parameter setting for the limiter.
On "Limiter parameter" menu screen, you can set "Grouping", "Threshold" and "Ratio"
parameters.
<"Grouping">
Option
The limiter works for each channel independently. (default)
Mono
Channels 1 and 2 are grouped, and the limiter works the same for channels
1-2
1 and 2 according to the input levels of channels 1 and 2.
Channels 1 through 6 are grouped, and the limiter works the same for
1-6
channels 1 and 6 according to the input levels of channels 1 through 6.
<Note>
Even if the [LIMITER] switch of a channel in the group is set to "OFF", the input
level of the channel is checked by the limiter. Therefore, do not feed any audio
signal to the unused channel in the group to prevent a malfunction of the
limiter.
<Threshold>
Option
-12dB
The threshold is set to -12 dB. (default)
-6dB
The threshold is set to -6 dB.
<Ratio (compression ratio)>
Option
The ratio is set to 1:3. (default)
1: 3
The ratio is set to 1:5.
1: 5
Comment
Comment
Comment