Programming Numbers - AMX AXD-CP4/PB Instruction Manual

System Send_Commands (Cont.)
WAKE
Deactivates
screen-saver
mode and resets
the sleep timer.
XMRT
Sets the new net-
work communica-
tion retry value for
the panel and
SoftROM.
XMTO
Sets the new net-
work communica-
tion delay for the
panel and Soft-
ROM.
ZAP!
Clears all mem-
ory; erases but-
tons, pages,
drawings, and
symbols.
Only use the ZAP! command to erase the saved data in the touch panel; data cannot be
recovered after it is erased.

Programming Numbers

The following information provides the programming numbers for colors, fonts, and borders.
Colors can be used to set the colors on buttons, sliders, gauges, and pages. The lowest color number
represents the lightest color-specific display; the highest number represents the darkest display. For
example, 0 represents light red, and 5 is dark red.
Colors and Programming Numbers
Color
Red
Orange
Yellow
Lime
Green
Aqua
Cyan
Royal
4" Color Touch Panels
Syntax:
"'WAKE'"
Example:
SEND_COMMAND TP,"'WAKE'"
Deactivates the touch panel screen-saver mode and resets the sleep timer.
Syntax:
"'XMRT <number>'"
Variable:
number = 1 - 15 ASCII characters
Example:
SEND_COMMAND TP,"'XMRT 9'"
Sets the XMODEM wait for character retries to 9.
Syntax:
"'XMTO <number>'"
Variable:
number = 4 - 30 ASCII characters
Example:
SEND_COMMAND TP,"'XMTO 5'"
Sets the new XMODEM character delay time to 5 seconds.
Syntax:
"'ZAP!'"
Example:
SEND_COMMAND TP,"'ZAP!'"
Clears all memory and erases all buttons, pages, drawings, and symbols.
See Warning information on page 35 for more information.
No. Color
0 - 5 Purple
6 - 11 Magenta
12 - 17 Pink
18 - 23 White
24 - 29 Grey
30 - 35 More Grey
36 - 41 Black
42 - 47 Transparent
No.
54 - 59
60 - 65
66 - 71
72 - 77
78 - 83
84 - 86
87
255
Programming
35