Hapter; Getting Started; Logging In - Altigen MaxSupervisor Manual

For max communication server release 6.5

Table of Contents

Start MaxSupervisor from the Microsoft Windows Start menu, by

choosing Start > All Programs > MaxSupervisor > MaxSupervisor.

Note: For users running Windows XP SP3, a firewall protection Security

Alert may pop up when opening the login window. If this happens,

click Yes to allow MaxSupervisor to run.

If you are connecting to the Internet through a modem connection, before

you log in, establish a session connection from your PC to your local

internet service provider. If you're using a low-speed connection, the login

may take some time, since a large amount of data is transferred to your

desktop.

If this is the first login to this MAXCS ACC/ACM system, enter the

system server's IP address or name of the system server you will be

using. To obtain the server name or IP address, ask your IT

administrator. (Subsequently, when you log in, you'll see the IP

address in the Server Name field.)

H A P T E R

MaxSupervisor Manual

Table of Contents