Webview Http-Port - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

Web Management Commands

webview http-port

Changes the port number for the embedded web management server.
webview http-port {default | port port}
Syntax Definitions
default
port
Defaults
parameter
port
Platforms Supported
OmniSwitch 10K
Usage Guidelines
All WebView sessions must be terminated before entering this command.
Examples
-> webview http-port port 1025
-> webview http-port default
Release History
Release 7.1.1; command was introduced.
Related Commands
webview access
show webview
MIB Objects
alaIND1WebMgtConfigMIBGroup
alaIND1WebMgtHttpPort
OmniSwitch CLI Reference Guide
Restores the port to its default (80) value.
The desired port number for the embedded Web server. The number
must be in the range 0 to 65535; well-known port numbers cannot be
configured.
default
80
Enables/disables webview access on the switch.
Displays web management configuration information.
March 2011
webview http-port
page 43-5