Show Switch Files - Alcatel-Lucent OmniSwitch AOS Release 7 Manual

Managing CMM Directory Content
CONFIGURATION STATUS
Running CMM
CMM Mode
Current CMM Slot
Running configuration
Certify/Restore Status
SYNCHRONIZATION STATUS
Running Configuration
The command returns the directory the switch is currently running from and which CMM is currently
controlling the switch (primary or secondary). It also displays wheter the switch is synchronized.

Show Switch Files

The files currently installed on a switch can be viewed using the
command displays the files currently in the specified directory.
To display files on a switch, enter the show microcode command with a directory, as shown:
-> show microcode certified
Package
-----------------+---------------+--------+-----------------------------------
Ros.img
Reni.img
If no directory is specified, the files that have been loaded into the running configuration are shown.
OmniSwitch AOS Release 7 Switch Management Guide
: PRIMARY,
: DUAL CMMs,
: A,
: WORKING,
: CERTIFY NEEDED
: NOT AVAILABLE,
Release Size
7.1.1.311.R01 2486643 Alcatel-Lucent OS
7.1.1.311.R01 941331 Alcatel-Lucent NI
March 2011
Managing Switch Configurations - Single CMM
show microcode command. This
Description
page 3-17