To Dial In To A Conference - Alcatel-Lucent OmniTouch My Teamwork Installation Manual

For acs release 7.1.4 unified conferencing and collaboration
Table of Contents

Advertisement

Installation Verification
............................................................................................................................................................................................................................................................
16. As Buddy-1, press the '#' key twice. Then press the '3' key once.
17. Hang up all phones.

To dial in to a conference

1. Open a conversation window.
2. As Buddy-1, click
conversation window.
3. Write down the leader and participant access codes.
4. Dial in to the system's main number.
5. Enter the leader's access code and press the '#' key once.
6. State the leader's name, and press the '#' key once.
7. From a second phone, dial in to the system's number.
8. Enter the participant's access code and press the '#' key once.
9. State the participant's name and press the '#' key once.
10. From a third phone, connected internally, dial into the system.
............................................................................................................................................................................................................................................................
8AL90213USAC ed 01
September 12, 2008
Verify that Buddy-1 hears a prompt stating there are 2 people in this call, and
then hears the names of both callers.
Verify proper blue phone icons and close all IM windows.
Email Invitations/View Dial-in Number
Verify that you hear the "Welcome" prompt.
Verify that you hear the "At the tone, please state your name" prompt.
Verify that you hear the "You are the only person in this conference. Please stay
on the line." prompt.
If Music on Hold was configured, verify that you hear the "To turn off the music,
press 1" prompt.
Verify that you hear Music On Hold.
Verify that you hear the "Welcome" prompt.
Verify that you hear the "At the tone, please state your name" prompt.
Verify that the caller hears the "One moment while your call is being
connected" prompt.
Verify that the participant is taken into the conference.
Verify that the leader is taken off "Music On Hold", and placed into the call.
Verify that the leader and both participants hear the participant's name spoken
when joining the conference.
Verify that this third caller hears the "welcome" prompt.
To dial in to a conference
under
in the
I want to...
5 - 5

Advertisement

Table of Contents
loading

Table of Contents