Alcatel-Lucent OmniTouch My Teamwork Installation Manual page 42

My Teamwork Licensing
............................................................................................................................................................................................................................................................
a. Select
b. Select
........................................................................................................................................................................................................................
Reset the virtual machine's hard drive settings to prevent additional changes to the virtual
7
hard drive.
a. Shut down the Windows virtual machine by selecting
Important!
b. After the virtual machine is off, double-click the Hard Disk line (under Devices).
c. Click the
d. Leave the
e. Click
f. Click
g. Close the TightVNC window.
........................................................................................................................................................................................................................
Mark the installation as completed.
8
a. Return to the Web Administration window on the client workstation. Select
b. Locate the box labeled
c. Select
........................................................................................................................................................................................................................
Test the new document sharing virtual machine.
9
When the server has rebooted, two tests should be performed.
a. Log into the Web Administration and select
............................................................................................................................................................................................................................................................
4 - 1 2
Start->All Programs->Accessories–>System Tools
->Activate Windows
program.
Start->All Programs->Microsoft Office
instructions given, selecting
program.
Start–>Turn Off Computer
Do NOT use the VMware Power Off button.
Advanced...
as
Mode Independent
on the
OK Advanced Hard Disk Options
for the
OK Virtual Machine Settings
Configuration–>Advanced Settings–>Construct Document Conversion VM.
at the bottom of the page. Click the
Construction
button in the resulting dialog box.
OK
If you forget step 8.b above, parts of the Document Conversion system will
Note:
not start when the OmniTouch ACS server is powered on.
Configuration–>Shutdown
server.
certain both the VMware Status and the Watchdog Status are 0/green.
and follow the instructions given. When completed, exit the
activation. When completed, exit the
Internet
and click
Turn Off
button in the lower right corner.
and select the
Step 4: Complete or Cancel Document Conversion VM
and click the
To construct Document Conversion VM
. Start Word and follow the
.
radio button.
Nonpersistent
page.
page.
button and click the
Complete
button to restart the
Restart
Monitoring–>Server Status
8AL90213USAC ed 01
. Make
September 12, 2008