For Any Installation; To Add Contacts - Alcatel-Lucent OmniTouch My Teamwork Installation Manual

For acs release 7.1.4 unified conferencing and collaboration
Table of Contents

Advertisement

Installation Verification
............................................................................................................................................................................................................................................................

For any installation

1. Check server status.
2. Check login page for messages.
3. Create a user from the
4. Log into Buddies as that user and verify that the
Administrator–>Configuration
appropriate build number.
5. Enter a number into the Buddies
Call
6. Hang up all calls.

To add contacts

1. Create two users (e.g., buddy1@company.office and buddy2@company.office) with
separate phone numbers.
2. Log Buddy-1 and Buddy-2 into Buddies on different computers.
3. As Buddy-1, go to the
4. In the
buddy2@company.office) and click the
5. As Buddy-2, verify that a message box appears stating Buddy-1 is adding Buddy-2 as a
contact.
6. Click
............................................................................................................................................................................................................................................................
5 - 2
Administrator–>Provisioning
button.
Verify that the Buddies IM window appears with the owner and dialed out
number as a member.
Verify owner's phone rings, and then the dialed out number rings. Answer both
phones.
Verify that both phone icons are now the 'green on the phone' icon.
Verify that both phones can talk and listen to each other.
Verify that both phone icons change to the disconnected state (blue phone).
Tools menu–>Add Contact
entry box, type in Buddy-2's email address (for example,
Enter User ID
Verify Buddy-2 is added as a contact.
.
OK
Verify Buddy-1 is added as a contact to Buddy-2.
Verify both Buddy-1 and Buddy-2 are receiving Presence updates by selecting
Buddy-1's status and changing it to "Out to Lunch." Verify Buddy-2 sees the
update and then change it back.
system page.
interface and
Buddies–>Help–>About
box and dial out by pressing the
Call this number
.
button.
OK
For any installation
show the
8AL90213USAC ed 01
September 12, 2008

Advertisement

Table of Contents
loading

Table of Contents