Table of Contents
Advertisement
OUTPut:EXTernal[:STATe]?
Example
OUTPut[:STATe]
Parameters
Comments
Example
58 E1463A Command Reference
OUTPut:EXTernal[:STATe]?
on the E1406A Command Module. The command returns "1" if the port is
enabled or "0" if the port is disabled.
Query "Trig Out" Port Enable State
This example enables the "Trig Out" port and queries the enable state.
OUTPut:EXTernal[:STATe]? returns "1" since the port is enabled.
OUTP:EXT ON
OUTP:EXT?
OUTPut[:STATe] <mode>
E1406A Command Module. OUTPut[:STATe] ON | 1 enables the port and
OUTPut[:STATe] OFF | 0 disables the port. This command functions the
same as OUTPut:EXTernal[:STATe].
Name
Type
<mode>
boolean
OUTPut[:STATe] OFF (port disabled)
*RST Condition:
Enabling "Trig Out" Port
OUTP ON
queries the present state of the "Trig Out" port
!Enable E1406A "Trig Out" port
!Query port enable state
enables or disables the "Trig Out" port on the
Range of Values
ON | OFF | 1 | 0
!Enable "Trig Out" port to output
pulse after each scanned channel
is closed
Default Value
OFF | 0
Chapter 3
Advertisement
Table of Contents
