Introduction; Specifications - Agilent Technologies 346A Operating And Service Manual

General Information

Introduction

Introduction
This manual contains operating and service information for the Agilent
Technologies model 346A, 346B, and 346C Noise Sources.
Included in the manual is information necessary to operate the noise
sources.

Specifications

The "Specifications - Table 1-1" on page 3, page 4, and page 5 are
performance standards or limits against which the noise source may be
tested. These specifications for the noise source when used with a Noise
Figure Analyzer are ONLY valid if the analyzer has been allowed to meet
its specified warm up time of 60 minutes.
ENR expanded uncertainty analysis and supplemental characteristics
are not specifications but are typical characteristics included as
additional information for the user.
o
NOTE Specifications are valid at ambient temperature 23 ±1 Celsius only.
2 Chapter 1