Change A - Agilent Technologies 346A Operating And Service Manual

Manual Changes
Manual Changes
Manual Changes
To adapt this manual to your instrument, refer to Table 2-1. Make all of
the manual changes listed opposite your instrument's serial number
prefix. Perform these changes in the sequence listed.
Table 2-1 Manual Changes by Serial Number
Instrument Serial Number Prefix Make Manual Changes
346B 1935A, 2015A A
If your instrument (all models) has a serial number prefix which is
higher in value than those listed on the title page of this manual, it may
be documented in a yellow MANUAL CHANGES supplement. For
additional information, refer to "Instruments Covered by Manual" in
the General Information section of this manual.

Change A

Table 1-2 Supplemental Characteristics
Change Switching Speed for both repetitive operation and single shot
operation to read: Turn off <140 s.
34 Chapter 2