Table 1-5
General Information
Installation
Original Packaging
Container and materials identical to those used in factory packaging are
available through Agilent Technologies offices. If the noise source is
being returned to Agilent Technologies for servicing, attach a tag
indicating the name and address of the company, the technical contact
person, phone number and extension, the model number, serial number,
type of service being requested, and failure symptoms if applicable. Mark
the shipping container FRAGILE. In any correspondence, refer to the
noise sources by model number and serial number.
Mating Connectors
The noise sources can be mated with other instrumentation having the
connectors listed in Table 1-5.
Connectors That Can Be Mated With the Noise Sources
Configuration
Input: all units
Output: standard
Opt.001
Opt.002
Opt.004
1
Must comply with U.S. Military Standard MII,C-39012
Storage and Shipping Environment
The noise sources should be stored in a clean, dry environment. The
following environmental limitations apply to both storage and shipment:
• Temperature: -55 °C to +75 °C
• Humidity: <95% relative
• Altitude: <15300 meters (50000 feet)
14
Mating Connector
1
BNC male
APC-3.5 female
SMA female
1
Type-N female
APC-7
1
Type-N male
Chapter 1