Introduction - Agilent Technologies 346A Operating And Service Manual

NOTE
Using the ENR Data Diskette

Introduction

Introduction
The Agilent 346 and 347 series of Noise Sources are supplied with the
noise source ENR data preloaded on diskette to allow easy downloading
into the Agilent NFA series Noise Figure Analyzers. This eliminates time
consuming and error prone manual keying of the ENR values.
Additionally you can easily open the ENR files using a standard text
editor and the files are easy to interpret and create.
This chapter covers the following:
• Loading the ENR Data from Diskette
• Saving the ENR Data to the Noise Figure Analyzer's Internal
Memory
• Copying the ENR Data from Diskette to the Noise Figure Analyzer's
Internal Memory
The following procedures do not apply to noise sources used with the
Agilent 8970A/B Noise Figure Meter.
You must enter ENR values manually into the 8970A/B.
36 Chapter 3