CAUTION
CAUTION
Installation
Handling Precautions
Do not disassemble the noise source. The diode module is static sensitive
and can be damaged or the calibration can be altered.
Do not drop the noise source. Dropping can damage the unit or alter the
calibration.
Proper connector care is essential. See Operator's Maintenance in the
Operation section of this manual for more information.
Initial Inspection
Inspect the shipping container for damage. Inspect the noise source for
mechanical damage incurred in transit. If the shipping container or
cushioning material is damaged, it should be kept until the contents of
the shipment have been checked for completeness and the noise source
has been mechanically and electrically checked. If the contents are
incomplete, if there is mechanical damage or a defect, or if the noise
source does not work electrically, notify the nearest Agilent Technologies
office. If the shipping container is damaged, or the cushioning material
shows signs of unusual stress, notify the carrier as well as the Agilent
Technologies office. Keep the shipping materials for the carrier's
inspection.
Chapter 1
General Information
Installation
13