Figure 4-4 Menu 11.5 - Remote Node Filter (Rfc 1483 Or Enet Encap Encapsulation ); Figure 4-5 Menu 11.5 - Remote Node Filter (Ppp Or Pppoe Encapsulation) - ZyXEL Communications PRESTIGE 650H-13 User Manual

Use Menu 11.5 – Remote Node Filter to specify the filter set(s) to apply to the incoming and outgoing
traffic between this remote node and the Prestige and also to prevent certain packets from triggering calls.
You can specify up to 4 filter sets separated by comma, for example, 1, 5, 9, 12, in each filter field.
Note that spaces are accepted in this field. The Prestige has a prepackaged filter set, NetBIOS_WAN, that
blocks NetBIOS packets (call protocol filter = 1). Include this in the call filter sets if you want to prevent
NetBIOS packets from triggering calls to a remote node.
Figure 4-4 Menu 11.5 — Remote Node Filter (RFC 1483 or ENET ENCAP Encapsulation )
Figure 4-5 Menu 11.5 — Remote Node Filter (PPP or PPPoE Encapsulation)
If you set the filters using the Internet Security in the Web Configurator, all your
custom incoming protocol filters will be replaced by rule 11 and 12.
Remote Node Configuration
Menu 11.5 - Remote Node Filter
Input Filter Sets:
protocol filters= 11, 12
device filters=
Output Filter Sets:
protocol filters=
device filters=
Enter here to CONFIRM or ESC to CANCEL:
Menu 11.5 - Remote Node Filter
Input Filter Sets:
protocol filters= 11, 12
device filters=
Output Filter Sets:
protocol filters=
device filters=
Call Filter Sets:
Protocol filters=
Device filters=
Enter here to CONFIRM or ESC to CANCEL:
Prestige 650H ADSL Router
4-9