Emergency Procedures - Teledyne 2120 Operating Instructions Manual

Trace Nitrogen in Argon Analyzer
maintenance, and safety instructions included in this
manual.
Anyone involved with the operation of this equipment
including plant engineering, operations, and management, must
understand the potential hazards involved, and know and observe all
required safety precautions.
Your safety and the safety of equipment, nearby facilities, and
personnel require a proper safety attitude and emphasis on safe work
procedures. This is the essence of any good safety program. If at any
time you identify safety deficiencies, immediately correct them and
bring them to the attention of management.
Before an accident can be prevented, it must be anticipated. Use
pre-job discussions with your coworkers and supervisors to identify
hazards and the means to avoid them. At your facility, various gases
may exist in liquid and/or gaseous states. Familiarize yourself with the
hazards associated with each gas found at your facility.
Read and understand the Material Safety Data Sheets (MSDS) for
the materials used with this equipment. All personnel who work in the
vicinity of this equipment should read, understand, and follow all safety
information contained in the MSDSs, in addition to following all
government and facility safety regulations.
CAUTION: NEVER INTRODUCE GASES OTHER THAN ARGON
INTO THE ANALYZER. IF EXPLOSIVE, FLAMMABLE,
OR CORROSIVE GASES OR GAS MIXTURES ARE
ALLOWED TO FLOW INTO THE ANALYZER, FIRE OR
EXPLOSION CAN RESULT. THIS ANALYZER IS NOT
DESIGNED TO BE USED IN HAZARDOUS AREAS.

1.7.1 Emergency Procedures

This analyzer is designed to operate safely, efficiently, and reliably.
However, as with any analytical equipment involving gases, an
emergency can occur at any time. The emergency response could
involve calling for medical assistance, management notification, fire
assistance, or evacuation from the vicinity of the analyzer. Obtain the
following phone numbers and post them at the site telephone locations.
Periodically review the numbers and update them as required.
Teledyne Analytical Instruments
Introduction
9