Storing Keystroke Programs - Savin 3699 Communication Information

E
Enter the code for "Delete Speed
Dial".
F
Enter the Speed Dial code you
wish to delete with the number
keys.
The registered
shown on the display.
Note
If you make a mistake before en-
tering the first digit, press the
{Clear} key and enter the correct
number. If you make a mistake
after entering the last digit,
press [No] and enter the number
again.
You can press [Status] to see
which Speed Dials are currently
programmed.
G
Press [Yes].
destination is
Note
If you press [No], the Speed Dial
is not deleted and the display
shown in F appears again.
H
Press [Yes].
The Speed Dial is deleted.
Note
If you press [No], the Speed Dial
is not deleted and the display
shown in F appears again.
I
Press [PrevMenu] three times.
J
Press [Exit] to return to standby
mode.

Storing Keystroke Programs

If you regularly send messages to a
particular destination or transmit us-
ing the same features, you can save a
lot of repetitive keypad operations by
storing these settings in a Keystroke
Program.
Keystroke Programs can then be re-
called by just pressing a Quick Dial
key. The following procedure can be
used to program a new Keystroke
Program or overwrite an old one.
You can register the following items
in Keystroke Programs:
• Memory Transmission, Immediate
Transmission, Confidential Trans-
mission, Polling
Program/Delete Menu
Transmission,
199
8