Registering Speed Dials - Savin 3699 Communication Information

G
Press [Yes].
Note
If you press [No], the Group is
not deleted and the display is
shown in step F appears again.
H
Press [Yes].
The Group is deleted.
Note
If you press [No], the Group is
not deleted and the display
shown in step F appears again.
I
Press [PrevMenu] three times.
J
Press [Exit].

Registering Speed Dials

If you register a destination in a
Speed Dial, you can dial that number
by just pressing the {Speed Dial} key
followed by a two or three digit code.
Use these steps to program a new
Speed Dial or overwrite an existing
one. You can register the following
items in a Speed Dial:
• Destination fax number (up to 100
numbers, up to 254 digits for each
number)
• Destination name
• A Telephone Directory search let-
ter (A to Z)
Important
We recommend that you print the
Speed Dial list for reference when-
ever you register or change Speed
Dials. P.209 "Reports/Lists".
Limitation
When a registered Speed Dial is
being used for a standby Memory
Transmission, the message "
ready assigned for Mail Box.
Cannot be changed."
and you cannot change the desti-
nation for this Quick Dial.
You can specify codes 00 to 99.
If you install the optional Function
Upgrade Card, you can register up
to 1,000 numbers in Speed Dials. In
this case codes 000 to 999 are used.
A
Make sure that the machine is in
standby mode.
Note
If the "Fax Features" or "Key
Op. Tools" screen is shown,
press the {User Tools} key. If any
other display is shown, press
the {Clear Modes/Energy Saver}
key.
Program/Delete Menu
Al-
is shown
195
8