Figure 2-8: 0-1 Vdc Or Rs 232 Digital Output Port - Teledyne AX300-I Operating/Service Instructions Manual

Operating Instructions
optional RS 232 Interface Cable (P/N B-75555) available from Teledyne for
connection to a standard RS 232 port on a computer or other suitably equipped
digital device.
CAUTION: AX300-I ANALYZER SHOULD ONLY BE CONNECTED TO AN
EN60601-1/IEC60606-1 APPROVED DEVICE.

Figure 2-8: 0-1 VDC or RS 232 Digital Output Port

RS232 signal output has been tested with Windows HyperTerminal. The setup
changes with different windows versions. If other software other than windows
HyperTerminal is used, consult with factory.
Windows 95 version
Baud:
Data:
Parity:
Stop bit:
Flow control:
Windows 98, Windows 2000 and Window XP version:
Baud:
Data:
Parity:
Stop bit:
Flow control:
Teledyne Analytical Instruments
2400
7
ODD
1
NONE
2400
8
ODD
1
NONE
AX300-I
12