Mounting; V-Mount Adapter Installation; Figure 2-3: Mounting The Sensor In The Tee Adapter; Figure 2-4: V-Mount Adapter Installation - Teledyne AX300-I Operating/Service Instructions Manual

Portable Oxygen Analyzer

Figure 2-3: Mounting the Sensor in the Tee Adapter

2.1.2 Mounting

The AX300-I can be mounted in several ways depending on the optional
equipment ordered at the time of purchase. See Section 1.3.

2.1.2.1 V-Mount Adapter Installation

The V-Mount Adapter consists of a matching plastic plate with integral V-
grooves that attach to the rear of the analyzer.
To install V-Mount Adapter, remove the battery compartment door by pry-
ing up the hinged latch at the bottom of the cover, then slide the adapter plate
into grooves provided in rear case. Replace the battery compartment door and
secure door latch. See Figure 2-4.
Note: Door latch fits tightly on the battery cover. Use a coin to gently pry up the latch.

Figure 2-4: V-Mount Adapter Installation

Teledyne Analytical Instruments
Operating Instructions
7