Roland Music Atelier AT-45 Owner's Manual page 65

1.
Select a Rhythm (p. 55).
2.
Press the [One Touch Program] button.
The [One Touch Program] button's indicator will light.
fig.02-15
An One Touch Program Group (One Touch Program Group select) screen
like the one shown below will be displayed for several seconds.
f
3.
While the One Touch Program Group screen is displayed,
touch the screen to select a One Touch Program group.
If you fail to select a One Touch Program group while the One Touch
Program Group screen is displayed, "Group 1" will be selected
automatically.
Panel settings appropriate for the rhythm and automatic accompaniment
will automatically be called up for Registration [1]–[4] buttons.
4.
Press the Registration [1] – [4] button to select panel settings.
5.
On the Lower keyboard, play a chord.
At the moment you play the lower keyboard, the Intro will begin, and then
the Rhythm and Automatic Accompaniment will play.
6.
Press the [Intro/Ending] or [Start/Stop] button to stop the
Rhythm.
Rhythm and Automatic Accompaniment stops.
7.
Press the [One Touch Program] button, extinguishing its
indicator.
You will return to the panel settings that were in effect prior to pressing the
[One Touch Program] button.
Chapter 2 Using Rhythm Performance
To redisplay the One Touch
Program Group screen,
while holding down the
Registration [Write] button,
press the [One Touch
Program] button.
Touch the One Touch
Program Group screen to
reselect the group.
When you press the [One
Touch Program] button, the
"Arranger Update" setting
will automatically change
to "INSTANT" (p. 174).
65