■ Selecting Pedal Bass Voice
Press the Pedal part buttons to select the voice.
Immediately after the power is turned on, the Pedal Bass voice will sound
single notes using the "Organ Bass1" voice.
fig.01-09
1
Example: Select "E. Bass 1" for the Pedal part
1.
Press the Pedal [Electric] button (indicator lights).
The name of the selected voice appears in the display for several seconds.
fig.01-10
Now when you play the Pedalboard, "E. Bass 1" (Electric Bass 1) will be
heard.
Chapter 1 Selecting and Playing Sounds
Normally, playing the
pedalboard will sound one
note at a time. Settings can
be adjusted to allow
multiple notes to be played
on the Pedalboard (p. 169).
If you press the Pedal [To
Lower] button (indicator
lights), the Pedal Bass voice
can now be played by the
Lower keyboard, not by the
Pedalboard (p. 127).
37