Table of Contents
Advertisement
■ Selecting a Voice Using the [Others] Button
Notice that there is an [Others] button for each part. By using the [Others]
button, you can select all voices.
As with the other voice buttons, the [Others] button can be assigned two
voices. You can use the [Alternate] button to switch between these two
voices.
1.
Press the [Alternate] button for the Part for which you wish
to specify a voice to select ON (lit) or OFF (dark).
The setting of the [Alternate] button: ON (lit) or OFF (dark), determines to
which of the two available locations a newly selected voice will be assigned.
2.
Press the [Others] button for the Part for which you wish to
specify a voice.
The Others Voice screen appears for several seconds.
fig.01-15
3.
Touch a button that shows a sound group.
fig.01-15
Chapter 1 Selecting and Playing Sounds
NOTE
When you press the
[Others] button, the Others
Voice screen appears in the
display screen, but the
basic screen will reappear if
you wait several seconds
without touching the
screen.
If you want to change the
voice for the [Others]
button, press the [Others]
button once more, then
select the voice by quickly
touching the screen while
the name of the voice
appears in the display.
A voice indicated by
is called an "EX voice."
These voices are especially
recommended.
39
Advertisement
Table of Contents
