Roland Music Atelier AT-45 Owner's Manual page 183

The V-LINK function is turned on, and the V-LINK icon
appears in the main screen.
The Send PC Switch settings is automatically switched to ON
when V-LINK is on (MODE 1, MODE 2). When the V-LINK
function is switched off, the Send PC Switch setting reverts to
the setting in effect before V-LINK was switched on.
When V-LINK is set to "MODE 1"
When a Registration button is pressed, "Bank Select"
and "Program Change Number" messages are
transmitted from the MIDI Out connector as video
control messages. At this time, the Control MIDI
transmit channel setting is disregarded, and the
messages are transmitted via Channel 16.
When V-LINK is set to "MODE 2"
In addition to the functions of "MODE 1," MODE 2
also sets the device to transmit "Note messages" as
video control messages from the MIDI Out connector
when one of the twelve rightmost keys in the Lower
keyboard is pressed.
In this case, the Lower and Solo MIDI transmit
channel settings are disregarded, and the messages
are transmitted via Channel 16.
NOTE
The MIDI transmit channel used for video control
messages is fixed at channel 16.
NOTE
For more on switching video images, refer to the owner's
manual for the connected device.
Chapter 10 Various Other Settings
You can also use the following procedure to turn the V-LINK
function on.
1.
Hold down the Composer [Reset] button and
press either the Upper Organ [Full] button or the
Upper Organ [Jazz] button.
Holding down the Composer [Reset] button and
pressing the Upper Organ [Full] button switches the
instrument to "MODE 1" (p. 182). Holding down the
Composer [Reset] button and pressing the Upper Organ
[Jazz] button switches the instrument to "MODE 2" (p.
182).
The display changes as shown below, and the AT-45
switches to Image Control mode.
The V-LINK function is turned on, and the V-LINK icon
appears in the main screen.
2.
To cancel the V-LINK function, once again hold
down the Composer [Reset] button and press
either the Upper Organ [Full] button or the Upper
Organ [Jazz] button.
If set to "MODE 1" (p. 182), holding down the Composer
[Reset] button and pressing the Upper Organ [Full]
button switches the V-LINK function off. If set to
"MODE 2" (p. 182), holding down the Composer [Reset]
button and pressing the Upper Organ [Jazz] button
switches the V-LINK function off.
183