Using Registrations Created On An Earlier Model - Roland Music Atelier AT-45 Owner's Manual

Using Registrations Created on an
Earlier Model
Registrations that were created on the AT-90/80/30 or ATELIER-R series
(AT-90R/80R/60R/30R/20R) can be used on the AT-45.
When using a set of registrations that was created on the AT-90/80/60
models, your registrations will be converted to work in the AT-45 models
and loaded into internal memory. When loading these registrations the
music style that was originally used can also be loaded into the [Disk/User]
button to complete the accurate reproduction of the original registration.
Recalling a registration that was created on the "AT-90/80/30"
1.
Insert the floppy disk that contains Registrations created on
an earlier model of the ATELIER series.
2.
Touch <Registration> on the Main screen.
The sub-window appears.
fig.03-04_55
3.
Touch <Load>.
The Registration Load screen appears.
fig.03-05_55
Chapter 3 Using the Registration Buttons
This operation is not
necessary when recalling a
registration that was
created on a model in the
AT-R series.
You can also open the
Registration Load screen by
pressing the [Registration]
button, without performing
steps 2 and 3.
99