Saving Performance Songs Onto Floppy Disk - Roland Music Atelier AT-45 Owner's Manual

Saving Performance Songs
Onto Floppy Disk
The performance data that you recorded will disappear
when the power of the AT-45 is turned off. If you wish to
keep the performance data, you can save it on a floppy disk.
If the performance data has never been saved to a floppy
disk, a " " symbol appears on the Main screen. When
the performance data is saved to a floppy disk, this symbol
will no longer be displayed.
1.
Make sure that the disk drive contains a disk that
was formatted by the AT-45.
2.
Touch <Rec/Play> on the Main screen.
The Rec/Play screen appears.
fig.07-04_50
3.
Touch < > (Utility).
The Utility screen appears.
fig.07-22_50
4.
Touch <Save/Delete>.
The Song Save/Song Delete screen appears.
Chapter 7 Recording/Playing Back What You Play
fig.07-22_50
5.
Touch <
save destination.
Numbers which have not been used in the saving
operation will be displayed as "- - - - -."
fig.07-28_50
To cancel the Save operation, touch the <Exit> to close
the Song Save/Song Delete screen.
6.
Touch <Save>.
The Save Format screen appears.
fig.07-29_50
7.
Touch the screen to select the format in which the
data will be saved.
You can select either "ORIGINAL" or "SMF" format.
Display
ORIGINAL
SMF
8.
Touch <OK> to finalize the save format.
Saving of the performance data will begin.
>< > to select the number of the
Description
Save data in Atelier format
Save data in SMF format
143