Error Message - Roland Music Atelier AT-45 Owner's Manual

Error Message

Error Message
Copy Protected.
Can't Save
Can't Save
This Song.
Write Protected
Disk
Master Disk
Read Only Song.
Can't Save
No Disk
Disk Full
Unknown Disk
Disk Ejected
Damaged Disk
Can't Read
Can't Play
Memory Full
MIDI Buffer Full
Communication
Error
Memory Error
194
To protect the copyright, this music file cannot be saved as SMF format.
You can only play the music data. It cannot be saved on a floppy disk or internal memory.
The protect tab on the floppy disk is set to the Protect position.
Change it to the Write position and repeat the procedure.
This floppy disk cannot store the format or save any data. Insert a different disk and repeat
the procedure.
A new song cannot be saved onto this floppy disk.
No floppy disk is connected to the disk drive. Insert the disk correctly, and repeat the
procedure.
There is not sufficient space left on the floppy disk for the data to be saved. Save the data
onto a different floppy disk or delete music data on the disk.
The floppy disk inserted into the disk drive cannot be read.
Please format the floppy disk.
The floppy disk was removed from the disk drive while loading or writing was in progress.
Insert the floppy disk and repeat the procedure.
This floppy disk is damaged and cannot be used. Insert a different disk and repeat the
procedure.
This song cannot be read.
It cannot be read the floppy disk quickly enough. Press the [Reset] button, then press the
[Play/Stop] button to play the song.
The Rhythm data is excessively large, and cannot be loaded.
The performance data is excessively large, and cannot be loaded.
Since the internal memory is full, recording or editing is not possible.
The AT-45 cannot deal with the excessive MIDI data sent from the external MIDI device.
Reduce the amount of MIDI data sent to the AT-45.
A MIDI cable or audio cable has been disconnected. Connect it properly and securely.
There is something wrong with the system. Repeat the procedure from the beginning.
Meanings