Silencing A Specific Track (Track Mute) - Roland Music Atelier AT-45 Owner's Manual

Chapter 7 Recording/Playing Back What You Play
Silencing a Specific Track
(Track Mute)
When the Rec/Play screen is displayed, the track button will
light to indicate a track in which a performance has been
recorded. By turning off these track buttons, you can
temporarily silence the sound. This is referred to as "Track
Mute."
1.
Touch <Rec/Play> on the Main Screen
The Rec/Play screen appears.
2.
Touch < > (Utility).
The Utility screen appears.
3.
Touch <Song Select>.
The Song Select screen appears.
fig.07-31_50
4.
In the screen, touch <
that you wish to play back.
5.
Touch <Load>.
The Rec/Play screen appears.
fig.07-04_50
All accompaniment data is grouped to the "Accmp" track
button in the Rec/Play screen. In the same manner, the
rhythm performance data is grouped to "Rhythm."
If you want to mute only a portion of the rhythms or
accompaniment, open up the Track Mute screen, and switch
off the Track Mute buttons there (p. 133).
132
>< > to select the song
6.
Press a track button that is lit, extinguishing the
button.
When you play back the performance, track buttons that
are not lighted will be muted (silenced).
fig.07-14
7.
Press the track button once again (button lights).
The part that had been muted will return to normal and
will be heard.
Correspondence Between Track Buttons and
Track Mute Buttons When Playing Back
Commercial SMF Music Files
Track button
Rhythm 10
Accmp 5, 6, 7, 8, 9, 11, 12, 13, 14, 15, 16
Bass 2
Lower 3
Upper 4
Solo 1
Correspondence Between Track Buttons and
Track Mute Buttons When Playing Back
Performance Data Created with an Music
Atelier
Track button
10, 11 (Drums/SFX),
Rhythm
13 (Manual Percussion)*
Accmp 5, 6, 7, 8, 9, 12, 14, 15
Bass 2 (Bass)
Lower 3 (Lower)
Upper 4 (Upper)
Solo 1 (Solo)
Control 16
* Track Mute button 13 is not used if the instrument does not
feature Manual Percussion.
Channel
Track Mute button