Storing Registrations; Write] Button → P - Roland Music Atelier AT-45 Owner's Manual

Chapter 3 Using the Registration Buttons
Procedure for Creating Registration Sets
You can change voice and other panel settings by pressing the Registration
buttons during performance of songs.
Prepare the Registrations
A convenient way to make the sequence of Registration buttons to be
pressed easy to understand is to store the panel settings starting from the
Registration [1] button, continuing with subsequent buttons in accordance
with the progression of the song.
Save the Registrations to the floppy disk
If you want to use more than eight Registrations in a song, save the settings
for Registration buttons [1] through [8] to a floppy disk as a set, then
continue to store further panel settings again, starting from Registration
button [1]. Save all of the Registration sets you have set to the floppy disk.
Arrange the Registrations in the sequence they are to be used
Save the Registration sets to the floppy disk in the order they are to be used
in the song.
You can use the Disk Edit function to alter the sequence and names of
rhythms contained on the floppy disk (p. 84, p. 98) as well as delete such
rhythms (p. 96).
Using Registration Sets
Call up the Registration sets saved on the floppy disk to the AT-45
Insert the floppy disk containing the saved Registration sets into the disk
drive, and load the Registration sets into the AT-45 (p. 91).
Switch the Registration sets as you perform
Press the Registration buttons to switch Registrations as you play the song.
You can assign the "Right + Load Next" to the foot switch and use it to call
up subsequent Registration sets (p. 106). When the Load Next function is
assigned to the foot switch, Registration sets are called up in the order they
are saved on the floppy disk.

Storing Registrations

fig.03-02
Write
1.
Make all the panel settings that you wish to store.
2.
While holding down the [Write] button, press one of the
Registration buttons [1]–[8].
The panel settings will be stored in the selected Registration button.
80
Manual 1 2 3 4 5 6
For details on the settings
that are stored in a
Registration, refer to
"Settings That Are Stored
In the Registration
Buttons" (p. 214).