Installation For The Lens Mount Assembly - 500 And 1000 Projectors Only; Removal For The Auto-Focus Switch Assembly - Models 1500 And 2000 Projectors Only - Kodak Ektalite 500 Service Manual

SERVICE MANUAL
23JUL01
Installation for the LENS MOUNT ASSEMBLY - 500 and
SM5766-1
Page
1000 PROJECTORS Only
34 of 96
1 Do the removal for the LENS MOUNT ASSEMBLY in reverse order.
Removal for the AUTO-FOCUS SWITCH ASSEMBLY - Models 1500 and
2000 PROJECTORS Only
AUTO FOCUS
MOTOR BRACKET
LOCKING
TAB
AUTO FOCUS
SWITCH LEVER
AUTO FOCUS SWITCH ASSEMBLY
Warning
Dangerous Voltage
1 Disconnect the main power.
Important
There is no AUTO-FOCUS SWITCH
ASSEMBLY on the Models 500 and 1000.
2 Do the removal for the LOWER
HOUSING ASSEMBLY.
3 Disconnect the 3 CONNECTORS on
the MAIN BOARD. It is not necessary to
disconnect the CONNECTOR next to
the LOWER LIGHT BAFFLE
ASSEMBLY.
grey, red,
4 Lift the MAIN BOARD up.
and black
wires
5 Remove the FOCUS KNOB.
6 Remove the short, gray wire from the
A091_4028GCA
A091_4028GA
AUTO-FOCUS DEFEAT SWITCH.
Removals and Installations