Installation For The Cycle Solenoid Assembly - Kodak Ektalite 500 Service Manual

SERVICE MANUAL
23JUL01
11 Remove the 2 Hex SCREWS -
SM5766-1
1/4 in. from the 2 CYCLE SOLENOID GROMMETS.
Page
20 of 96
12 Pull the CYCLE SOLENOID ASSEMBLY up and out.
13 If necessary, remove the CYCLE SOLENOID PLUNGER ASSEMBLY.

Installation for the CYCLE SOLENOID ASSEMBLY

Important
Do the adjustment for the CYCLE SOLENOID ASSEMBLY. See the Adjustments section.
1 Do the removal for the CYCLE SOLENOID ASSEMBLY in reverse order.
Removals and Installations