Kodak Ektalite 500 Service Manual page 68

SERVICE MANUAL
23JUL01
SM5766-1
Page
Auto Focus System
68 of 96
Reliability
Maintenance
Warranty
INT/EXT SWITCH
Model 2000 Only
Gate Temperature
Noise Development
• After the initial focus adjustment,
the auto-focus system will adjust
for the difference in the slide
position from slide to slide. This
focus adjustment will occur within
1 second after the slide is
inserted into the GATE.
• The focus adjustment variation
should not change from the focus
and reverse specifications by
more than 3 times the focus and
reverse specifications.
The projector can operate for 2000
hours or 2,000,000 cycles. The
projector has a MTBF (mean time
between failures) of 7500 operation
hours.
Preventive maintenance by a qualified
service person is recommended
every 1500 hours of operation, or
after 1 year.
The projector has a warranty by
Eastman Kodak Company to operate
correctly for one year from the date
of purchase.
Used for internal and external LAMP
control. The LAMP POWER SWITCH
must be set on either the LO/HI
position in the "INT" position.
95 - 100° average
Approximately 50 dB
Specifications