Installation For The Motor; Removal For The Worm Pulley And Mechanism Belt - Kodak Ektalite 500 Service Manual

SERVICE MANUAL
23JUL01

Installation for the MOTOR

SM5766-1
Page
13 of 96
Important
When installing the FAN and MECHANISM BELTS, install the MECHANISM BELT on the
small MOTOR PULLEY, and the FAN BELT on the large MOTOR PULLEY.
1 Do the removal for the MOTOR in reverse order.

Removal for the WORM PULLEY and MECHANISM BELT

Warning
Dangerous Voltage
1 Disconnect the main power.
2 Do the removal for the LOWER HOUSING ASSEMBLY.
3 Do the removal for the MOTOR except do not disconnect the wires from the MOTOR.
4 Remove the Torx SCREW from the WORM PULLEY ASSEMBLY.
FAN BELT
MECHANISM BELT
Removals and Installations
A091_4015BCA
A091_4015BA