SERVICE MANUAL
23JUL01
SM5766-1
Page
53 of 96
A091_4027BCA
A091_4027BA
12
Manually move the CLAMP PAD ASSEMBLY until the TAB is in the NULL position.
Warning
Dangerous Voltage
13
Connect the main power.
Important
It is necessary to use a FAN COVER TOOL.
14
Install the FAN COVER TOOL over the FAN area and the LAMP MODULE.
15
Install and hold the AUTO FOCUS TARGET SLIDE TL-3002 until it is fully seated in the
GATE MECHANISM.
16
Set the projector to the LO-LAMP position.
17
Observe the image of the focus light path on the bottom of the FAN CAP; the light path
should be in the center of the hole in the FAN CAP.
light path
Adjustments
NULL position
TAB
CLAMP LEVER
PAD