Mechanism Frame And Lens Mount - Kodak EKTAPRO 4020 Service Manual

Service Manual

MECHANISM FRAME and LENS MOUNT

1
. Remove the UPPER HOUSING. See page 4-1.
2
. Remove the CENTER HOUSING. See page 4-4.
3
. Remove the 4 SCREWS and the TRANSFORMER. See page 4-11.
4
. Remove the SCREW and disconnect the NEUTRAL WIRE.
5
. For Model 5020, 9020 and 9020/CINE remove the SCREW, the AF PCB and the 2 CONNECTORS from
the AF PCB.
6
. Lift the MECHANISM FRAME and LENS MOUNT and remove the 3 CONNECTORS J 3, J 10, J 12.
See page 4-19.
SCREW (4)
TRANSFORMER
NEUTRAL WIRE
MECHANISM
FRAME
03/98
figure 4-17
4-12
SM2547-1
SCREW
AF PCB
LENS MOUNT
Kodak AG, Stuttgart