Kodak Ektalite 500 Service Manual page 9

SERVICE MANUAL
23JUL01
SM5766-1
Page
Caution
9 of 96
Move the MOTOR to allow access to the parts; wires are still connected to the MOTOR. Do
not cause damage to the MOTOR wires.
17 Remove the RETAINER CLIP from the FAN SHAFT.
18 Pull the FAN up and off the FAN SHAFT to allow access to the FAN BELT.
19 Remove the FAN BELT.
20 Remove the 3 Torx SCREWS from the FAN SHAFT ASSEMBLY.
21 Lift and remove the FAN SHAFT ASSEMBLY.
MOTOR
SCREW
FAN BELT
MECHANISM BELT
Removals and Installations
RETAINER CLIP
SCREW (2)
FAN
BLOWER
ASSEMBLY
SCREW (3)
FAN PLATE
ASSEMBLY
A091_4012HCA
A091_4012HA