Attach The Drain Bottle - Roland SOLJET SC-500 User Manual

What to Do upon Opening the Carton
For Macintosh
Connection to a Macintosh requires optional items such as special cable. For more information on the required optional items and
connection settings, contact a Roland dealer.

3 Attach the Drain Bottle

*The tube cap and the cap for the drain bottle are required when moving the machine, so do not discard them.
1
Detach the tube plug from the tube tips protruding
from the bottom surface of the right-hand side of the
unit.
Tube
3
Remove the cap for the drain bottle and attach the drain bottle to the unit by screwing
it on in the direction of the arrow. Line up the threads on the drain bottle with the
threads on the unit, and screw on the bottle without applying excessive force.
Leave this mounted unless transporting the main unit, or when it is full.
The machine comes with a spare drain bottle. Use it for storing discharged ink temporarily.
16
2
Tube plug
Pass the tube through the hole in the drain-bottle
mounting cap and align with the threaded hole.
Tighten the included screws.
Drain-bottle cap
Drain bottle