Specifications - Roland SOLJET SC-500 User Manual

Specifications

Specifications
Printing/Cutting method
Printing/Cutting area
Acceptable Sheet material
material widths
Roll material
Width of material that can be cut off
Conditions for usable materials
Type
Ink
Capacity
cartridges
Color
Apparent colors
Printing resolution (Printing dot resolution)
Distance accuracy (When printing)
Acceptable tool
Cutting speed
Blade force
Blade offset compensation
Software resolution (When cutting)
Distance accuracy (When cutting)
Repetition accuracy (When cutting)
Repetition between printing and cutting
Printing heads cleaning
Interface
Instruction system
Power-saving function
Power
Printing/Cutting mode
consumption
Standby mode
Acoustic
Printing/Cutting mode
noise level
Standby mode
94
Piezo ink-jet method/media-moving method
1346.2 mm x 24998 mm (53 in. x 984-1/8 in.)
(Note that detection of the front and rear edges is not possible for material measuring from 131 mm to 430 mm (5-3/16 to 17 in.).)
(Note that detection of the front and rear edges is not possible for material measuring from131 mm to 430 mm (5-3/16 to 17 in.).)
Cuttable material thickness: 0.08 to 0.22 mm (0.00315 to 0.00866 in.) (depending on material composition)
Maximum cuttable material thickness including base paper: 0.4 mm (0.0157 in.)
Maximum printable material thickness including base paper: 1.0 mm (0.039 in.) (when head is raised to maximum)
Maximum diameter for roll material: 180 mm (7-1/16 in.)
Core inner diameter for roll material: 50.8 mm (2 in.) or 76.2 mm (3 in.)
Maximum weight for roll material: 20 kg (44.1 lb.)
Six colors: cyan, magenta, yellow, black, light cyan and light magenta
1440 dpi x 720 dpi / 720 dpi x 720 dpi / 540 dpi x 540 dpi / 360 dpi x 720 dpi / 180 dpi x 720 dpi
Error of less than 0.3% of distance traveled, or 0.3 mm, whichever is greater
(at Roland PET-film, print travel: 1 m (39-3/8 in.)
Cutter (blade and blade holder): Special blade for CAMM-1 series
10 to 600 mm/s (10 to 300 mm/s in the material-feed direction)
Error of less than 0.4% of distance traveled, or 0.3 mm, whichever is greater
When distance correction has been performed (when the setting for [CALIBRATION] - [CUTTING ADJ.] has been made):
Error of less than 0.2% of distance traveled, or 0.1 mm, whichever is greater
0.1 mm or less (excluding stretching/contraction of the material)
For materials with a width exceeding 610 mm (24 in.): Length 4,000 mm (157-7/16 in.)
For materials with a width of 610 mm (24 in.) or less : Length 8,000 mm (315-15/16 in.)
(excluding possible shift caused by expansion/contraction of the material and/or by reloading the material,
and provided that material length is under 3000 mm (118-1/16 in.)
Bidirectional parallel interface (compliant with IEEE 1284: nibble mode)
RD-GL III (Cutting), RD-RTL (Printing), RD-PJL
Maximum: 1.0A/100V to 240V
Maximum: 0.4A/100V to 240V
64dB (A) or less (According to ISO7779)
40dB (A) or less (According to ISO7779)
SC-500
131 to 1371 mm (5-3/16 to 54 in.)
131 to 1371 mm (5-3/16 to 54 in.)
131 to 1371 mm (5-3/16 to 54 in.)
Exclusive SOL INK cartridge
220 cc 5 cc
16.7 million colors
30 to 200 gf
0.000 to 1.500 mm (0 to 0.0591 in.)
0.025 mm/step (0.00984 in./step)
Range for assured repetition accuracy (*)
0.5 mm ( 0.0197 in.) max. at 25 C
Automatic cleaning and manual cleaning
Auto-sleep
10% 50/60 Hz
10% 50/60 Hz
For items indicates by an asterisk "(*)", please see the next page.
Continued on the next page