How To Replace The Separating Knife - Roland SOLJET SC-500 User Manual

How to Replace the Separating Knife

Do not touch the tip of the blade
with your fingers.
Doing so may result in injury, and the
cutting performance of the blade will be
impaired.
If the separating knife, replace it with the replacement blade.
1
Press the [POWER] key to switch off the power.
The POWER LED goes out
3
Remove the separating knife.
(1) Loosen the screw until it slips out.
(2) Grasp the screw portion, and slowly pull it out in
the direction of the arrow.
* Do not pull back while doing this.
If the blade remains in the carriage, use commer-
cially available tweezers to remove it.
(2)
(1)
Make sure the power to the unit is
off before attempting to replace the
separating knife.
Doing so may result in injury.
2
Turn off the main power switch.
4
Replace with a new knife.
Positioning groove
5
Install the separating knife.
(1) Grasp the screw portion and slowly insert it into
the groove.
* Take care to ensure that the knife does not slip
(2) Tighten the screw.
Maintenance
The knife is secured in
place by the magnet.
(1)
(2)
49