Performing Overprinting - Roland SOLJET SC-500 User Manual

5
Press the [ ] key to make the following screen
appear on the display.
CUTTING ADJ.
FEED ADJUST
7
Press the [ ] key to make the following screen
appear on the display.

Performing Overprinting

This prints the same image superimposed over the same location a number of times.
When printing materials such as fabric, colors may not come out well with just a single printing pass. Overprinting can achieve darker
printing results.
You can choose either [2] (two passes) or [3] (three passes) as the number of passes for overprinting.
Performing overprinting may result in ink smudges or stretch the fabric.
When you use the program to set the number of passes for overprinting, the program's setting takes priority.
The setting made with the control panel for the machine takes effect only in cases where the setting for the number of
overprinting passes is not made with the program.
1
Press the [MENU] key and [
following screen appear on the display.
3
Use the [ ] and [
passes (two or three), then press the [ENTER] key.
OVER PRINT
NONE 2
SCAN ADJUST
+0.00% +0.00%
] key to make the
MENU
OVER PRINT
] keys to choose the number of
6
Use the [ ] key to choose [FEED ADJUST] or
[SCAN ADJUST].
CUTTING ADJ.
SCAN ADJUST
8
Input the correction value calculated in step (2).
Select the correction value with the [
and press the [ENTER] key.
Repeat steps 6 through 8 and perform [FEED AD-
JUST] or [SCAN ADJUST].
2
Press the [ ] key to make the following screen
appear on the display.
OVER PRINT
NONE
User's Reference
] [ ] key,
NONE
67