Bidirectional Correction - Roland SOLJET SC-500 User Manual

Bidirectional Correction

* Only when the printing direction at the [PRINT MODE] menu has been set to [BI-DIRECTION] (bidirectional)
This adjusts slippage when performing bidirectional printing.
Make this adjustment when you have replaced the material with a different type or adjusted the head height.
1
Press the [MENU] key and [
following screen appear on the display.
3
Press the [ENTER] key to start printing a test pattern.
Test pattern
+15 +14 +13 +12 +11 +10 +9 +8 +7 +6 +5 +4 +3 +2 +1
5
Press the [ ] key to make the following screen
appear on the display.
BIDIRECTION
ADJUST
7
Use the [ ] and [
checked in step 4, then press the [ENTER] key.
ADJUST
+0 +5
-15 to +15 (In steps of 1)
] key to make the
MENU
BIDIRECTION
Value with no displacement
] keys to set the value you
2
Press the [
appear on the display.
4
Check the test pattern and choose a value with no
displacement.
Current setting
0 -1 -2 -3 -4 -5 -6
6
Press the [
appear on the display.
User's Reference
] key to make the following screen
BIDIRECTION
TEST PRINT
-7 -8 -9 -10 -11 -12 -13 -14 -15
] key to make the following screen
ADJUST
+0 +0
65