Step 5: Installing The Drain Bottle - Roland TrueVIS SG3-540 Setup Manual

1. Assembly and Ink Filling

Step 5: Installing the Drain Bottle

Procedure
1.
Remove the drain pad.
Discharged fluid used in the inspection when the printer was shipped may remain. Exercise cau-
tion.
2.
Install the drain funnel.
Screw the drain funnel all the way into the hole where the drain pad was attached.
IMPORTANT
Use caution to turn the bottle without applying excessive force.
3.
Insert the drain bottle stand into the grooves
.
30
Installation
, and then slide it in the direction indicated in the figure